
Yesterday, I lastly obtained the mirror hung within the lobby of our bed room suite. Some time again, I floated the concept of placing sconces on both facet of the mirror, however after searching for sconces (and never being impressed with something I discovered), and the extra I thought of it, the extra I didn’t like that concept. It appeared too predictable and, nicely, too boring.
So I dominated out that concept and thought I would check out the concept of lighting the mirror from the again. For the reason that mirror needed to stand out from the wall a bit to clear the big chair rail molding, it appeared like the proper alternative to check out the concept of a backlit mirror.
I wanted the mirror to return off the wall 1.25″ to clear the chair rail, and I figured that I might get that distance with a chunk of 1″ x 4″ lumber (which is 3/4″ thick) hooked up to the wall with two screws protruding the remainder of the way in which. I painted the board darkish teal to match the wallpaper (type of) after which screwed it to the wall. The mirror is type of heavy, so I had to make use of screws. I don’t love the concept of placing screws into the wallpaper, however I didn’t actually have an alternative choice.

These are the lights I attempted out. I selected these as a result of they’d a shiny white choice and the transformer field is fairly small, so it could possibly be tucked behind the mirror. Many of the different tape lights had actually huge transformer bins that wouldn’t match behind the mirror.

It wasn’t fairly lengthy sufficient to place it proper on the edge by the body, so I needed to deliver the sunshine strip in about three inches to make all of it the way in which across the again of the mirror.

I had excessive hopes for this, however once I obtained the mirror hung and turned the lights on, I wasn’t impressed.

I would prefer it extra if the wall was the identical from ceiling to flooring. If the entire wall have been grasscloth, or if the entire wall have been painted white, I would really feel in a different way about it. However this look simply wasn’t working for me. Plus, it didn’t actually present any helpful lighting within the space. The ceiling gentle is definitely a lot shiny and supplies all of the lighting that this small lobby space wants.
So I deserted that concept and unhooked the lights. Then I introduced on this plant (it’s a pretend one from World Market) and put it on this fairly basket {that a} pal gave me for my birthday a couple of months again, and I beloved it. So ultimately, I received’t have any extra lighting on this wall.

I nonetheless want to scrub the mirror and get the sticky tag off of it, however right here’s a take a look at the facet view so as to see the way it stands out from the wall only a bit. The hole doesn’t trouble me, and it truly seems significantly better than I had anticipated.

I do have another ornamental gadgets that I’m going so as to add to this wall across the mirror, in addition to the partitions on both facet of the toilet (i.e., future storage closet) doorways, however I don’t have them but. They’re imagined to be delivered right this moment, so keep tuned for that.

So the lobby is coming alongside. My largest query now could be what to do with this lengthy, uninterrupted wall that’s partly within the lobby space and continues into the bed room.

From the appropriate fringe of the toilet door trim to the tip of the wall, I’ve 11′ 4″ of house. It’s the longest, uninterrupted wall house in your entire bed room suite, and I do not know what to place there.

I’m type of tempted simply to go away it clean. I don’t essentially assume that each single wall wants one thing on it. However then again, that’s an terrible lot of wall house to go away clean.

In different information, I introduced within the different bench from the breakfast room to see if I had sufficient room on the finish of the mattress for the bench. And because it seems, I’ve loads of room! And now I’m questioning if this is able to be an important place to make use of extra of the hen material.

If it sits on the foot of the mattress, that is the place it could sit.

And that also leaves me loads of house between the bench and the dresser. It’s proper at 5 ft of house between the 2.

If I exploit the bench on the foot of the mattress, I would like the legs to be stained and never painted. I must tape off the place the recliner will go to ensure there’s room for each of them, however I feel there’s loads of room. Anyway, I don’t know that I essentially want each a bench and a recliner, however I do assume a bench lined within the hen material on the foot of the mattress can be lovely.
I’ll in all probability wait till I’ve the recliner in hand (and in place) earlier than making that ultimate determination. The excellent news is that it has lastly been shipped. The dangerous information is that it’s coming from abroad someplace, and it takes 7-14 days to even attain the U.S. Then it’ll be one other few days earlier than it reaches our entrance door. So I would nonetheless be taking a look at three weeks earlier than I’ve the recliner. *Sigh* Oh nicely. There’s nothing I can do about that apart from be affected person and work on different issues till it will get right here.
However the hen material will certainly make an look on one thing massive and important within the room. I already know for positive I’ll be utilizing it on huge pillows on the mattress, after which I’ll both use it for a quilt cowl (or throw) for the foot of the mattress, or I’ll use it to reupholster this bench for the foot of the mattress. Both manner, it’ll play a distinguished position within the general design of the room. It received’t be as distinguished as the unique plan of utilizing it on the headboard, nevertheless it’ll be a giant participant within the design.
Extra About Our Grasp Bed room
see all grasp
bed room diy initiatives
learn all grasp
bed room weblog posts
Â
Â
Trending Merchandise




